Henan Zhongke Engineering & Technology Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. Zhou Christina
  • Company Name : Henan Zhongke Engineering & Technology Co., Ltd.
  • Tel : 0086-371-67898596
  • Fax : 0086-371-67898596
  • Address : Henan,Zhengzhou,Weat Huagong Road
  • Country/Region : China
  • Zip : 450000

High Pressure Suspension Grinder

High Pressure Suspension Grinder
Product Detailed
Related Categories:Mining Machinery

Detailed Product Description


Introduction of High Pressure Suspension Grinder:
High Pressure Suspension Grinder is mainly applied to the powder processing of mineral products in the industries of metallurgy, construction materials, chemical, and mining, etc. it can produce powder from various non-flammable and non-explosive mineral materials with Mohs hardness below 9.3 and humidity below 6%, such as quartz, feldspar, calcite, talcum, barite, fluoride, Xircom, cinder, white lime, cement clinker, activated carbon, dolomite, granite, soft coal, coking coal, lignite, magnesia, chromium oxide green, gold ore, red clay, clay, kaolin, coke, coal Gangue, porcelain clay, kyanite, fluorspar, bentonite, medicinal stone liparite, diabase, pyrophyllite, shale red stone, emeraldite, basalt, gypsum, graphite, carborundun, heat insulating material, etc.

High Pressure Suspension Grinder Working principle:
The whole system of High pressure consists of main frame, decelerator, classifier, piping device, blower, jaw crusher, dustpan elevator, electromagnetic vibration feeder, and electric switch box , motor, etc.
1, Materials are firstly crushed by the jaw crusher; then the crushed materials is transferred to a hopper by the elevator and fed uniformly, quantitatively and continuously by the vibration feeder in the grinding chamber of the main frame for grinding. The grinding particles are brought up by the air current of the blower into the classifier for classification. The particles with the required fineness are brought up by the air current through the pipe into a cyclone collector for separation and collection and the finished particles are discharged from a pipe outlet.

2, Due to some moisture contained in the materials to be grinded, the heat resulting from grinding leads to the vaporized air which changes the airflow volume. Moreover, the outside air inhaled from the narrow gaps, of the piping connections can increase the volume of air current. Therefore, it is necessary to adjust to redundant air pipe between the blower and the main unit for keeping the balance of the air current. The redundant air is then guided into a cloth bag of a dust cleaner to collect the fine powder in the air. And the redundant air is discharged after purification.

3, the main unit runs with a central shaft is driven by a transmission device. The top of the shaft is connected with a quincunx stand, on which a grinding roller is installed to form a swing support, the grinding roller not only rotates around its own axis due to the friction, it also rotates around the ring.

4, The classifier performs the function of classifying the particles by the rotation of blades on the disk driven by a speed-adjustable motor. The rotation speed of the blades is regulated according to the particle size of the finished powder. The coarse particles drop because of self-gravity into the grinding chamber for regrinding. The qualified particles go through the blades and are inhaled by the air current into the cyclone. Then the particles are separated from the air current and collected.

5. The cyclone collector plays an important role in the performance of the grinding mill. Because the core of the upward rotating air current is in state of negative pressure, the lower part of the collector must meet a very strict requirement of sealing and be isolated entirely form the outside air. Otherwise, the collected particles will be taken away by the central air current, which will directly influence the output of the complete system. Therefore, a powder-locking unit is installed under the collector. Its is a very important component. If the powder-locking unit has not strict sealing,the output of the complete system will be seriously influenced with no or less production of the finished powder.

 If you are interested in the by us, please or visit the website of the company for relevant prices and detailed technical parameters and specifications etc. We will assure you of our best service at all time!  Skype:cindylee55  Cellphone No.:008613213220053

Specifications of High Pressure Suspension Grinder
TypeRollerRingfreeding size(mm)Fineness of product(mm)power(kw)
NoDiameter(mm)Height(mm)Inside Diameter(mm)Height(mm)
YGM653210150650150<150.613-0.03315
YGM753260150780150<150.613-0.03318.5
YGM853270140830140<200.613-0.03322
YGM85B3270150830150<200.613-0.03322
YGM954310170950170<250.613-0.03337

Notice: Any change of High Pressure Suspension Grinder technical data shall not be advised additionally.



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.